Fully automatic type SCW

  • According to preference the carpet winder can be laid out for feeding pile down or pile up. Irrespective of the feeding the winding direction pile in/pile out is optional.
  • Driven nip rollers automatically feed the carpet from the cross cutting unit to the winding rollers.
  • The electrically driven cross cutting unit has two rotating knives.
  • The double, tiltable roller path has driven rollers for automatic feeding for the winding direction pile in or pile out. With the roller path at its bottom position any seams and possible faults can be projected out on the floor in front of the operator.
  • Rubber-covered winding rollers, diameter approx. 320 mm, with separate A.C. drive and infinitely variable adjustment of the speed difference by means of a potentiometer.
  • Electronic pre-set counter with calibration possibility for the correct roll length.
  • Hopper for cardboard tubes with automatic feeding device. At request the machine can be supplied with a double hopper for two cardboard tube lengths.
  • A driven holder roller for automatic start-up without using staples or tape.
  • Pneumatic roll ejection by lifting the rear winding roller.
  • Flexible and reliable PLC, with the control panel placed on the machine.
  • The winder type SCW can be supplied built together with our fully automatic plastic film wrapping unit.